When evaluating future water tank purchases for spraying haul roads, take a close look at how its design lends itself to accomplishing these goals.
By Josh Swank

Site safety and efficiency are two of the main reasons why spraying haul roads is common practice. Yet, ironically, the equipment many operations use to wet the roads is neither the safest nor most efficient option. The secret to finding the ideal solution lies within the water tank’s design and spraying system.

Do Not Cut Corners
Square tanks haul about 20 percent more water than rounded tanks with the same basic exterior dimensions. They also improve safety by creating a lower center of gravity. Curved sides raise the water’s center of gravity, reducing stability. Rounded sides also contribute to water churning since there are no corners to slow the water’s momentum. This sloshing can shift the center of gravity, making the truck unstable and unsafe. Drivers who can feel water surging often mitigate the problem by not filling the tank completely, in turn, wasting time and fuel on unnecessary trips to refill. And at the end of the day, each truck covers far less ground.

The box-shaped structure of some water tanks increases capacity by about 20 percent and lowers the load’s overall center of gravity, enhancing stability and safety. Photos courtesy of Philippi-Hagenbuch Inc.

Spray Smarter
Providing drivers with precise control of the tank’s water output increases efficiency. Individually controlled spray heads make it easier for drivers to optimize water use while reducing the risk of oversaturating roads. Operators can turn on the individual spray heads and, with some systems, program a spraying interval to cover a greater surface area without making the roads too slick.

Water-metering controls also increase driver safety by allowing him or her to focus more on the surroundings and less on water output. Remote controls can further improve safety by keeping drivers out of harm’s way—with easy-to-use controls available within the cab, the operator never has to leave their seat to control every aspect of the tank.

PHIL water tanks have baffling from floor to ceiling, as well as along the complete length and width of the tank, resulting in full compartmentalization of the water and less surging.

Bafflingly Safe
A tank’s baffling system affects both safety and efficiency as it prevents water from surging side-to-side and front-to-back. Almost all water tanks feature baffles, but some designs are more effective than others.

Many baffles have large holes for maintenance personnel to access individual compartments through which water can also move freely, resulting in surging. While baffles require holes for water to flow throughout the tank, they should be small enough to prevent surging. Additionally, some tanks feature baffling from floor to ceiling, as well as along the complete length and width of the tank, for more complete compartmentalization. Others take it even further with side-surge stabilizers along interior walls to prevent water from churning within individual sections. These added measures go a long way toward improving tank stability and overall safety.

Anytime safety and efficiency are the main objectives, using equipment that falls short in either category does not add up. When evaluating future tank purchases, take a close look at how its design lends itself to accomplishing these goals. | WA

Josh Swank is Vice President of Sales and Marketing for Philippi-Hagenbuch. He oversees their global sales team and has been with the company for more than 20 years. His previous roles within the company include global sales and marketing manager and account manager. Outside of Philippi-Hagenbuch, he participates in multiple industry and philanthropic organizations, including the National Stone Sand and Gravel Manufacturers & Services Board, the NSSGA Young Leaders and the National Mining Association Board of Governors. He is a trustee of the JWAS Foundation and active within the Peoria, IL technology startup community. He can be reached at (309) 634-0026 or e-mail [email protected].

Engineering innovative haul-truck solutions for more than 50 years, Philippi-Hagenbuch Inc. is located in Peoria, IL and has been building equipment for off-highway haul trucks since 1969. During this time PHIL has become the global leader in off-highway truck customization. In addition to their innovative tailgates, push blocks, rear-eject bodies, and trailers, Philippi-Hagenbuch designs and builds end-dump bodies, trailers, sideboards, load ejectors, and water tanks for nearly every make and model of articulated and rigid frame off-highway truck available. For more information, visit www.philsystems.com.

Sponsor