Remote-controlled demolition machines: providing safe demolition solutions.

Peter Bigwood

 

Shards of concrete, high working heights, falling rubble, piles of metal rebar—it’s often what a construction and demolition jobsite looks like, and it’s a hotbed for injuries. Personal protective equipment like hard hats, boots and safety glasses can help prevent some, but as long as operators are in the line of fire, the threat is there.

 

Amidst the debris another threat lurks. It’s less obvious, but no less debilitating—prolonged and repetitive use of handheld equipment. There’s no personal protective equipment to help fend off the injuries they can cause to arms, backs, hands, shoulders and wrists.

 

You’ll see handheld equipment like rivet busters, breakers or chipping guns on nearly every construction and demolition jobsite. Among those who run them day after day, and increasingly among those who pay the workers’ compensation premiums, handheld tools are notorious for causing injuries. They produce heavy vibrations that are transferred directly to the operator, and prolonged use can lead to carpal tunnel syndrome, nerve damage and hand-arm vibration syndrome. These injuries make completing simple tasks like writing or gripping a steering wheel challenging.

 

Fortunately, there’s another option that attacks the problem of jobsite injuries from several entirely different angles: remote-controlled demolition robots. They are hard-hitting, powerful and versatile machines that take safety, not to mention productivity, to a whole new level. And they’ve been doing it for more than 30 years.

 

An Alternative Solution

The first commercially built remote-controlled demolition machine made its debut in 1981. It was designed by a Swedish contractor who had been awarded a job to clean a furnace in a lead smelting plant. The work required his crewmembers to endure above-normal temperatures and use jackhammers at awkward angles. It was a recipe for fatigue, potential burns and hand, arm and back injuries. The contractor devised a solution for working smarter, not harder; a piece of equipment that could do the same work while the operator ran the machine from a safe distance. Over the next few decades, as the arsenal of remote-controlled demolition machines grew, so did their use in applications outside of smelting plants, and for good reason.

 

Today’s remote-controlled demolition machines have a three-arm system that on some models can rotate 360 degrees. This allows operators to perform a range of tasks at nearly any angle without fatiguing or straining muscles. Operators can equip them with attachments, including breakers, buckets, grapples, scabblers and shears to do jobs like demolish, crush, cut, sort and move material, all while remaining a safe distance from the work.

 

A Baltimore-based demolition contracting firm used remote-controlled demolition machines—along with breaker and pulverizer attachments—to transform a 1920s refrigeration warehouse into a 430,000-square-foot museum, in Washington D.C. In the midst of the demolition, a major recycling operation also was underway. The crew sorted concrete to send to a remote crushing facility and steel to ship to a scrap yard for sizing and processing—recycling over 90 percent of the buildings’ weight. The hydraulic tools and the machine’s wide range of arm movement aided efficiency when sorting the materials, while keeping operators away from any injury-prone areas.

 

Beyond providing relief in recycling efforts, remote-controlled demolition machines substantially reduce the risk of injuries or death from hazards like falling debris when operating handheld tools or machines, such as some mini-excavators, that are not fully enclosed.

 

Remote-controlled demolition machines can be as short as 3 feet and as narrow as 2 feet, so they can maneuver through doorways, into elevators and throughout confined spaces. Some models can even climb stairs. And while the smaller models are compact, they can fight with the best of them to effectively demolish materials. Larger units can be as tall as 8.5 feet and as wide as 7 feet with even greater hitting power.

 

Remote-controlled demolition machines are ideal for increasing safety in many applications in a variety of industries like construction, demolition, mining and tunneling. With that and the machines’ versatility, remote-controlled demolition machines have blasted a true niche in the industry to become many contractors’ go-to weapon on many types of jobs.

 

Changing the Industry

Demolishing a building in an urban area can be challenging. Imploding or using a wrecking ball comes with the risk of injuries to bystanders and workers, not to mention damage to nearby structures. Instead, contractors can use a remote-controlled demolition machine and use a “top-down” approach. They can equip the machine with a breaker or crusher, mount it to a hoist and break up the roof while pushing demolished material into the building. This virtually eliminates the risk of injuries from falling debris and damage to adjacent buildings. There’s also less of a nuisance to occupants of surrounding buildings because they don’t need to evacuate. A “top-down” approach also might be one of the only options on projects where structures are located near hazardous materials like combustible fuel tanks.

 

Demolition work inside buildings and confined spaces also can be dangerous. Workers can get hurt if ceilings, floors or stairs collapse as they are being demolished or when equipment exceeds low floor load requirements. Aged sewer and water tunnels also can collapse when crews demolish liners. And there are always risks when operating handheld tools at odd angles, such as overhead or horizontally. Compact remote-controlled demolition machines, on the other hand, can access this kind of work while remaining outside of the immediate work zone. Even something as seemingly simple as removing a concrete staircase can be accomplished quickly and safely with a demolition machine, eliminating not only major risks of injury, but also little cuts and bruises as well.

 

Projects inside or near hospitals can pose some interesting challenges as well. Dust can be hazardous, noise can be disruptive to patients, and vibrations can cause problems during nearby surgeries. Work adjacent to museums needs to be handled carefully as well; vibrations from demolition work can damage precious artifacts. A more stealthy approach is with a remote-controlled demolition machine equipped with a crusher attachment to quietly pulverize material with minimal dust, noise and vibrations.

 

Finally, many jobsites include not only concrete, but also metal, including angle irons, I-beams and, of course, rebar. Most often a torch is the tool of choice for cutting these materials, but there are risks ranging from hazardous smoke to potential burns. Contractors can instead use a remote-controlled demolition machine with a metal shear attachment to safely cut through metal and rebar without the risk of injuries and they can do it as much as four times faster.

 

Less is More

Hands down the most notable benefit of remote-controlled demolition machines is safety, and it has been a primary factor in their increasing popularity. But so are the effects the machines have had on businesses. The increased safety leads to fewer injuries and workers’ compensation claims, which means associated costs are reduced substantially. For some companies that could mean a speedy return on investment, and for others it could be the difference between maintaining profitability and searching for a new line of work.

 

They’re fast, too. In fact, remote-controlled demolition machines can do the work of as many as three operators with handheld equipment in the same amount of time. This means contractors can do more with less and in less time, and that means they can bid on jobs with tighter deadlines.

 

Since remote-controlled demolition machines can be used with a variety of attachments in a diverse range of applications, contractors also can expand their businesses into new markets and bid on more types of jobs that they simply didn’t have the ability to take on before.

 

Prepared to Protect

Safety is one of the most critical issues on every construction or demolition mission. Getting everyone home safe at the end of every day often requires reinforcements beyond standard protective gear. Especially when jobs become tricky or more dangerous, it’s time for the big guns—remote-controlled demolition machines. In the struggle for safety, efficiency and lowering costs, they’re the ultimate individual, crew and company protective equipment.

 

Peter Bigwood is the vice president of sales and marketing for Brokk’s (Monroe, WA) North American subsidiary. He has more than 25 years of industry and leadership experience. Peter is a member of the National Demolition Association and Concrete Sawing and Drilling Association and is on the safety committee for the Steel Manufacturers Association. Brokk AB has been a leading manufacturer of remote-controlled demolition machines and attachments for more than 35 years. Through continuous innovation in engineering and design, Brokk is able to offer unique solutions to multiple industries worldwide, including construction, demolition, mining and tunneling, cement and process, nuclear and other specialty applications. For more information, call (800) 621-7856, e-mail [email protected] or visit www.brokk.com.

Brokk_B160 demo food plant pedestal-1 Brokk_Overhead Brokk_size Brokk_threearm Brokk_TopDown

Sponsor