ISRI Board of Directors will consider the addition of two new and one modified nonferrous metal specifications along with proposed changes to the guidelines for paper stock contained in the ISRI Scrap Specifications Circular at its upcoming Summer Board Meeting to be held in Washington, DC on July 16, 2021:
Proposed New Nonferrous Specifications:
SAINT
Nickel Bearing Scrap
Any nickel bearing alloy scrap that contains a minimum of 3% recovered nickel. Nickel content to be determined by recovery after buyer’s evaluation minus any non-conforming material and/or contamination. Balance of elements contained to be discussed between buyer and seller. Material is to be free of any foreign material. Final material specifications to be determined between buyer and seller.
REELS
Mixed Nonferrous Wheel Weights
To consist of nonferrous wheel weights that are a minimum of 60% (overall) nonferrous and no more than 40% Iron (Fe). Anticipated nonferrous material may be both lead and zinc weights. To be free of foreign material. Final material specifications to be determined between buyer and seller.
Proposed Modification to Nonferrous Specification:
ROPES
Lead Wheel Weights
To consist of lead wheel weights with or without iron clips. Not to include scrap lead, lugs or plates unless specifically agreed to. To be free of foreign material. Final material specifications to be determined between buyer and seller.
Proposed Changes to Guidelines for Paper Stock:
Recommendation 1: Outthrows – To change the words to read “will make the pack undesirable and unsuitable for consumption as the grade specified.”
Current wording in the Specs Circular, with recommended changes:
1. Outthrows
The term “Outthrows” as used throughout this section is defined as “all papers that will make the pack undesirable and unsuitable for consumption as the grade specified.”
Recommendation 2: Prohibitives – To change the words to read “will make the pack unacceptable and unusable as the grade specified”.
Current wording in the Specs Circular, with recommended changes:
2. Prohibitive Materials
The term “Prohibitive Materials” as used throughout this
section is defined as:
a. Any materials which by their presence in a packing
of paper stock, in excess of the amount allowed, will make the pack unacceptable and unusable as the grade specified.
b. Any materials that may be damaging to equipment.
Recommendation 3: Review Date – To add new components to the Paper Stock Section: a) a review date, and b) a section or page showing when and what changes were made.
The proposed changes were previously approved by ISRI’s Nonferrous Division and Paper Division, respectively, in May 2021. The full Board may choose to adopt, amend, or reject the recommendations of the Division or table them pending further review. More information about the rules governing the procedures from the addition, amendment, or withdrawal of ISRI’s scrap specifications can be found in the Scrap Specifications Circular. To submit comments, recommendations, or questions please contact ISRI Chief Economist Joe Pickard. There will be an open comment period for 30 days following the vote by the Board.